Mitsubishi Electric Q66DA-G User Manual page 152

7
ONLINE MODULE CHANGE
7
7.3 Online Module Change Procedure
- 24
7.3.4 When user range setting is used and initial setting was made with GX Configurator-DA (other system
(c) Click the [Close] button to close the System Monitor dialog box.
(d) On the pass data screen of GX Configurator-DA, set the prerecorded values and
make a pass data write request. (Refer to Section 5.6.4.)
(e) In the Operating condition setting window of GX Configurator-DA, set "Enable" in
the Setting value field of CH
channel used.
(f) In the Monitor/Test window of GX Configurator-DA, set a value in the setting value
field of CH Digital value of the used channel, and click the [Execute test] button.
D/A conversion enable/disable setting for each