For Use On Remote I/O Network - Mitsubishi Electric Q66DA-G User Manual

6
PROGRAMMING
6.3

For Use on Remote I/O Network

(1) System configuration
(2) Conditions for the intelligent function module switch setting
Input range setting
CH1
CH2
CH3
to
CH6
Based on the setting conditions given in the above, make the intelligent function module
switch settings.
Select the [I/O assignment] tab on the [Intelligent function module switch settings] screen,
and click [Switch setting] to set the following values.
6
- 10 6.3 For Use on Remote I/O Network
Remote master station (Network No.1)
QJ71LP21
QX10(X20 to X2F)
QY10(Y30 to Y3F)
HOLD/CLEAR function setting
4 to 20mA
0 to 5V
not used
Switch No.
Switch 1 0030
H
Switch 2 0000
H
Switch 3 0000 (CH1,CH2: CLEAR)
H
Switch 4 0F00 (High resolution mode)
H
Switch 5 0000 (0: Fixed)
H
Remote I/O station (Station No.1)
Q66DA-G(X/Y120 to X/Y12F)
QY10 (Y110 to Y11F)
QX10 (X100 to X10F)
QJ72LP25
CLEAR
-
Setting value
(CH1: 4 to 20mA, CH2: 0 to 5V, CH3 to CH6: Default)
Normal/High resolution mode
High resolution mode
-