Mitsubishi Electric Q66DA-G User Manual page 89

5
UTILITY PACKAGE (GX Configurator-DA)
(2) Command buttons
Common operations to the <<Intelligent function module parameter>> and
<<FB support parameter>> tabs
When the <<FB support parameter>> tab is selected
When the <<Intelligent function module parameter>> tab is selected
(3) Menu bar
(a) File menu
Deletes the initial setting and auto refresh setting of the selected
module.
However, with any initial setting and auto refresh setting present,
selecting the cell of "initial setting" or "auto refresh" and executing
it will delete only the setting of the selected cell.
Closes this screen.
Moves the setting of the selected line to the <<Intelligent function
module parameter>> tab.
Moves the setting of the selected line to the <<FB support
parameter>> tab.
Intelligent function module parameters of the project opened by GX Developer are
handled.
[Open parameters]:
[Close parameters]:
[Save parameters]:
[Delete parameters]:
[Open FB support parame-
ters]:
[Save as FB support parame-
ters]:
[Exit]:
(b) Online menu
[Monitor/Test]:
[Read from PLC]:
[Write to PLC]:
5.3.3 Starting the Intelligent function module utility
Reads a parameter file.
Closes the parameter file. If any data are
modified, a dialog asking for file saving
will appear.
Saves the parameter file.
Deletes the parameter file.
Opens the FB support parameter file.
Saves the FB support parameter file.
Closes this screen.
Activates the Select monitor/test module
screen.
Reads intelligent function module param-
eters from the CPU module.
Writes intelligent function module param-
eters to the CPU module.
5.3 Utility Package Operation
1
2
3
4
5
6
7
8
5
- 13