Mitsubishi Electric Q66DA-G User Manual page 138

7
ONLINE MODULE CHANGE
(2) Dismounting of module
.
7
- 10 7.3 Online Module Change Procedure
7.3.2 When industrial shipment setting is used and initial setting was made with sequence program
(a) After choosing [Diagnostics] - [Online module change] in GX Developer to enter
the "Online module change" mode, double-click the module to be changed online
to display the "Online module change" dialog box.
(b) Click the "Execution" button to enable a module change.
If the following error message appears, click the [OK] button, dismount the module
as-is, and mount a new module.