Mitsubishi Electric Q66DA-G User Manual page 155

7
ONLINE MODULE CHANGE
(2) Dismounting of module
7.3.5 When user range setting is used and initial setting was made with sequence program (other system is
(a) After choosing [Diagnostics] - [Online module change] in GX Developer to enter
the "Online module change" mode, double-click the module to be changed online
to display the "Online module change" dialog box.
(b) Click the "Execution" button to enable a module change.
If the following error message appears, the user range data cannot be saved.
Click the [OK] button, and perform the operation in Section 7.3.6 (2) (c) and later.
7.3 Online Module Change Procedure
1
2
3
4
5
6
7
8
7
- 27