Pass Data - Mitsubishi Electric Q66DA-G User Manual

5
UTILITY PACKAGE (GX Configurator-DA)
5.6.4

Pass data

Save and restore the user range data in the following sequence.
(1) Switch to the Pass data screen
Perform the operation in Section 5.6.1 to display the Pass data screen.
(2) User range saving
(a) Set the user range to be used in the Setting value field of CH
(b) Change the Setting value field of Pass data read request to "Request", and click
(c) Compare the values with those in the range reference table, and record them if
cation setting, and click the
When the user range setting is completed, it is displayed in the Current value field
of CH Pass data classification setting.
the button.
When reading is completed, the values are displayed in the Current value fields of
CH Industrial shipment settings offset/gain values/CH
set/gain values.
they are correct.
Refer to Section 7.4 for the range reference table.
Pass data classifi-
button.
User range settings off-
5.6 Monitoring/Test
5.6.4 Pass data
1
2
3
4
5
6
7
8
5
- 27