Appendices; Appendix 1 Dedicated Instruction List And Available Devices - Mitsubishi Electric Q66DA-G User Manual

APPENDICES

APPENDICES

Appendix 1 Dedicated Instruction List and Available Devices

App
- 1 Appendix 1 Dedicated Instruction List and Available Devices
(1) Dedicated instruction list
The following table lists the dedicated instructions that can be used with the Q66DA-
G.
Instruction
G(P).OFFGAN
G(P).OGLOAD
G(P).OGSTOR
When the module is mounted to a MELSECNET/H remote station, the dedicated
instructions cannot be used.
(2) Available devices
The following devices are available for the dedicated instructions:
Internal devices
*1
Bit
X, Y, M, L, F, V, B
*1 Word device bit designation can be used as bit data.
Word device bit designation is done by designating
(Designation of bit numbers is done in hexadecimal.)
For example, bit 10 of D0 is designated as
However, there can be no bit designation for timers (T), retentive timers (ST) and counters (C).
*2 Available devices are given in each of the Constant field.
Description
Switches to the offset/gain setting mode.
Switches to the normal mode.
Reads the offset/gain values of the user range setting to the
CPU.
Restores the offset/gain values of the user range setting stored
in the CPU to the Q66DA-G.
Word
T, ST, C, D, W
DO.A
File register
R, ZR
Bit No.
. .
Word device
.
Reference
section
Appendix 1.1
Appendix 1.2
Appendix 1.3
*2
Constant
K, H