Utility Package (Gx Configurator-Ct); Utility Package Functions - Mitsubishi Electric QD62 User Manual

7 UTILITY PACKAGE (GX Configurator-CT)

7 UTILITY PACKAGE (GX Configurator-CT)

7.1 Utility Package Functions

Table 7.1 shows a list of the utility package functions.
Table 7.1 Utility Package (GX Configurator-CT) Function List
Function
(1) Performs initial settings for each channel to operate the QD62 (E/D).
Sets values for the following items that require initial setting.
• CH
• CH
• CH
• CH
Initial setting
• CH
• CH
• CH
(2) The data for which initial setting has been completed is registered in the
PLC CPU parameters, and automatically written to the QD62 (E/D)
when the PLC CPU is placed in the RUN status.
(1) Sets for each channel the QD62 (E/D) buffer memory that refreshes
automatically.
• CH
• CH
• CH
• CH
Auto refresh
• CH
• CH
• CH
(2) Values stored in the buffer memory of the QD62 (E/D) where automatic
refresh is set are automatically read when the PLC CPU executes the
END command.
Monitors and tests the buffer memory and I/O signals for the QD62 (E/D).
• X/Y device
• CH
Monitor/test
• CH
• CH
• CH
7 - 1
Description
Preset value setting
Coincidence output point set No.1
Coincidence output point set No.2
Counter function selection setting
Sampling/periodic setting [unit: 10 ms]
Ring counter maximum value
Ring counter minimum value
Preset value
Latch count value
Sampling count value
Periodic pulse counter present value
Periodic pulse counter previous value
Sampling/periodic counter flag
Overflow detection flag
Preset function
Coincidence output function
Counter selection function
Ring counter function
MELSEC-Q
Reference section
Section 7.4
Section 7.5
7
Section 7.6
7 - 1