Chapter6 Utility Package (Gx Configurator-Ct); Utility Package Functions - Mitsubishi Electric qd63p6 User Manual

6
UTILITY PACKAGE (GX Configurator-CT)
CHAPTER6
6.1

Utility Package Functions

Table 6.1 shows the functions of the utility package.
Function
(1) Make the initial settings for each channel to operate the QD63P6.
Initial setting
(2) Data with initial settings are registered to programmable controller CPU parameters and are
(1) Set the buffer memory of the QD63P6 to which auto refresh is to be performed for each
Auto refresh
(2) The values stored in the QD63P6 buffer memory with auto refresh setting are automatically
(1) Monitors/tests the following buffer memories and I/O signals of the QD63P6.
Monitor/Test
(2)Monitors the following buffer memories of the QD63P6.
6
- 1 6.1 Utility Package Functions
UTILITY PACKAGE (GX Configurator-CT)
Table 6.1 Utility package (GX Configurator-CT) functions list
Set the values of the items where initial settings are required.
CH Preset value setting
CH Coincidence detection point change request
CH Coincidence detection point setting
CH Ring counter lower limit value
CH Ring counter upper limit value
CH Period setting
automatically written to the QD63P6 when the programmable controller CPU is in RUN.
channel.
CH Present value A
CH Present value B
CH Overflow detection flag
CH Periodic counter flag
CH Previous periodic pulse count value
CH Present periodic pulse count value
CH Judgment value for updated periodic pulse count value
CH Error code
read when the programmable controller CPU executes the END instruction.
Y device
CH Ring counter lower limit value
CH Ring counter upper limit value
CH Preset value setting
CH Coincidence detection point setting
CH Coincidence detection point change request
CH Period setting
CH Error reset command
X device
CH Present value A
CH Present value B
CH Overflow detection flag
CH Error code
CH Periodic counter flag
CH Previous periodic pulse count value
CH Present periodic pulse count value
CH Judgment value for updated periodic pulse count value
Description Reference
Section 6.4
Section 6.5
Section 6.6