AEMC 8335 User Manual page 16

Measurement selection (refer to chart below)

Calculation of DPF, Tan, KF, Φ, UNB, Min, Max, VAR, Harmonics, PST, and
DF parameters and the frequency measurement can only be performed
if voltage or current with a frequency of 41 to 70Hz is applied to the Ch1
voltage input or the A1 current input.
Selection of waveforms to be displayed (use the ▲ and ▼ buttons to select):

U: Signifies phase-to-phase voltage
V: Signifies phase-to-neutral voltage
A: Displays V and A for each phase
L1, L2, L3: Refer to the phases (A,B,C)
Icon Description
RMS
True RMS Measurement
THD
Total Harmonic Distortion
CF
Crest Factor
Display of current values and their extremes
Display all voltage and current measurements simultaneously
(RMS, DC, THD, CF, PST, KF, DF)
Fresnel diagram
V
Single voltage mode
A
Simple current mode
VA
Power mode
U
Voltage mode (phase-to-phase)
Zoom in
Zoom out
< > Left/right key prompt
^
Up/down key prompt
PF...
Display of PF, DPF and Tan.
W...
Active power.
Recording mode
Recording display and selection mode
OK
Validation prompt
Shutdown function in progress prompt
Display of energy consumed
Display of energy generated
14
Power Quality Analyzer Model 8335