Selecting A Recording; Deleting A Recording - AEMC 8230 User Manual

Powerpad jr. single-phase power quality analyzer

Table of Contents

5.6.2

Selecting a Recording

The status bar at the top displays the memory occupied by previous records.

To Select a Recording:

•

Select the

stored recordings.

NOTE: If the "@" symbol appears as the first letter of the recording name (e.g. @

EST), the data may be corrupted and should be checked carefully.

•

Select the desired recording using the ▲▼ buttons, then press the Enter

button.

•

Next, select the measurement recording to be displayed using the ▲▼

buttons and then press the Enter button. The corresponding screen will

display.

•

Return to the previous screen by selecting the

button (the

NOTE: It is possible to return to any mode by pressing the corresponding mode

button (e.g.

5.6.3

To Delete a Recording:

•

Select the

display.

•

Select the recording to be deleted, then press the Enter button.

NOTE: The deletion of the record may take a few seconds to complete.

icon with the ◄ button. The screen displays the various

tool must be selected).

, etc.)

icon with the ◄► buttons. The erase recording screen will

icon with the ◄

Power Quality Analyzer Model 8230

Table of Contents