Instrument Configuration (Set-Up Mode) - AEMC 8335 User Manual

4.3 Instrument Configuration
NOTE: All configurations are also available through DataView
The instrument must be configured the first time it is used and then
whenever necessary. The configuration is saved in memory when the
instrument is turned OFF.
Press the
• Set the display language by pressing the yellow button corresponding to the
screen language icons.
• The parameter that is ready to be configured will be highlighted in yellow. To
move to a different parameter, use the ▲ and ▼ buttons.
• Press the Enter
• Use the ◄ and ► buttons to change a value or setting.
• When finished, return to the Configuration menu by pressing the
button.
PARAMETER
Date / Time
Contrast / Brightness
Colors
Calculation Methods
30
button to configure the unit. The following sub-menus appear:
button to select a parameter.
FUNCTION
Sets the date and time format
Adjusts the contrast and brightness of the display
Defines the color of the voltage and current curves
Determines if harmonics are used or not used in calculations of
reactive quantities (power and energy)
- With harmonics: harmonics are taken into account when
calculating reactive parameters.
- Without harmonics: only the fundamental part is used for
the calculation of reactive parameters
(Set-up mode)
Figure 4-2
Power Quality Analyzer Model 8335
software.
®