AEMC 8335 User Manual page 74

9. In the Ready to Install the Program window, click on Install.
10. If the feature selected for installation requires the use of a USB port, a warning
box will appear, similar to Figure 7-3. Click OK.
The installation of the drivers may take a few moments. Windows may
even indicate that it is not responding, however it is running. Please wait
for it to finish.
12. When the drivers have finished installing, the Installation Wizard Complete
window will appear. Click on Finish.
14. A Question dialog box appears next. Click Yes to read the procedure for con-
necting the instrument to the USB port on the computer.
The Set-up window remains open. You may now select another option to
download (e.g. Adobe
15. Restart your computer, then connect the instrument to the USB port on the
computer.
16. Once connected, the Found New Hardware dialog box will appear. Windows
will complete the driver installation process automatically.
Shortcuts for DataView
installation process have been added to your desktop.
If you connected your instrument to the computer before installing the
software and drivers, you may need to use the Add/Remove Hardware
utility to remove the instrument driver before repeating the process.
72
Figure 7-3
Reader), or close the window.
®
and each instrument control panel selected during the
®
Power Quality Analyzer Model 8335