AEMC 8335 User Manual page 56

Item Function
Selection of graphs to be displayed
- 4V: displays the 4 single voltages during the transient (here in a 5-wire tri-phase
connection)
1 - 4A: displays the 3 currents and the neutral current during the transient
- L1, L2 or L3: displays the current and the single voltage successively in relation to
- N: displays neutral
Instantaneous value of the signals according to the position of the cursor on the scale.
2
To move the cursor use the ▲ and ▼ buttons.
: Zoom Out - To zoom out press the yellow button for this icon.
3
: Zoom In - To zoom in press the yellow keypad key for the icon.
3. To return to the Recording List screen, press
6.1.1.4 Deleting a Transient
From the Recording List screen (see § 6.1.1.3), press the
Select the transient to be deleted using the ▲ and ▼ buttons, then press the
symbol.
To leave this screen without deleting, press any of the Mode buttons on the Pow-
erPad .
®
To return to the Waveform Capture screen, press
54
Figure 6-4
phases 1, 2 and 3
.
icon's yellow button.
.
Power Quality Analyzer Model 8335
1
2
3