6.1.1.1 Programming and Starting a Search
To program the search for a transient, proceed as follows:
Select the submenu by pressing the
ule screen is displayed.
1
Item
Function
1
Reminder of the mode used
2
Display of sub-mode used
3
Flashing
4
Memory indicator. Black area = used memory; White area = available memory
5
Transients search start and end times
Adjustment of voltage and current activation thresholds
6
(1%, 2%, 5%, 10%, 20%, 50%, 100%)
7
Choice of number and name of transients (210 max)
8
The
icon is displayed when programming starts.
To configure and start the programming of a search:
1.
Select and set the desired configurations for the Start/Stop date and time, the
Voltage and Current threshold, Count and Series name.
2.
To start programming a search between the start and end times which you
have defined press the yellow button for the OK icon.
•
The
OK icon disappears and the
•
When the start time is reached the message
played.
52
2
3
4
icon: indicates that the search has been started
icon's yellow button. The Detection Sched-
Figure 6-2
icon appears instead.
Power Quality Analyzer Model 8335
5
6
7
8
Search pending is dis-