Button Functions - AEMC 8335 User Manual

1
Screen 1 of the help function
2
Screen 2 of the help function
Screen 1 of the selected recording parameter
1
Screen 2 of the selected recording parameter
2
Screen 3 of the selected recording parameter
3
Screen 4 of the selected recording parameter
4
Following page screen
Previous page screen
Trash for deleted or removed elements

2.5 Button Functions

Icon Description
Transients or Inrush Current:
Harmonics Mode:
Waveforms Mode:
Alarm Events:
Trend Mode:
Power / Energy:
Power Quality Analyzer Model 8335
• set and view transient and inrush current waveforms associated with
rapid changes in input
• display of the harmonics in percent and value ratios for voltage, current
and power, for each harmonic through the 50th
• determination of harmonic current produced by non-linear loads
• analysis of the problems caused by harmonics according to their order
(heating of neutrals, conductors, motors, etc.)
• displays voltage and current waveforms or vector representation
• identification of signal distortion signatures
• display of amplitude and phase unbalance for voltage and current
• checking connections for correct phase order
• provides a list of the alarms recorded according to the thresholds
programmed during configuration
• logging of interruption with half-cycle resolution
• determination of energy consumption exceedances
• stores value, duration, date, time and set point for up to 4096 events
• records measured and calculated vales (Urms, Vrms, Arms, etc.)
• display of power levels and the associated parameters
(power factor, displacement and tangent)
• energy monitoring
• four quadrant measurement to discern produced/consumed active ener-
gies and inductive/capacitive reactive energies
15