AEMC 8335 User Manual page 89

• From the "Recorded Data" window it is possible to delete files stored on the
PowerPad
®
• The "Download All Recorded Data" button allows the user to download and
save all the files on the PowerPad
• Recorded data can also be found from the Instrument tree view. Expand the
sections under "Recorded Data from the Instrument" then click on a line
that describes the desired recorded data. It will bring up a window with a graph
of the data.
Recordings:
The Recording tab displays a list of recordings within the PowerPad
These recordings can be selected and downloaded to a database.
Photographs:
The Photographs tab displays a list of photographs (snapshots), with the date and
time, taken when the camera button was pressed.
When "View" is selected, it shows the waveforms, power data and Bitmap image
of the PowerPad
Snapshots can only be initiated using the camera button on the Power-
Pad itself, not by DataView
®
Alarms:
The Alarms tab displays the alarm search that was recorded to the PowerPad
Details on the alarm search are available by clicking on the desired alarm set,
which opens up an alarm window with the searches details. Alarm search data can
be selected and downloaded to a Spreadsheet or a DataView
the corresponding buttons.
Transients:
The Transients tab displays transients stored on the PowerPad
number and name of the recording, and the time it began and ended. The selected
transient(s) can either be downloaded or deleted.
The downloaded result contains many waveforms. Use the controls "><" and "<>"
located at the lower right corner of the window, to zoom in or out of the data.
These controls are available in every graph from recorded data.
There is also a checkbox, "View As List", which can be used to show the value
of every datapoint.
Power Quality Analyzer Model 8335
using the "Delete" button
screen from the time the camera button was pressed.
®
for later viewing and analysis.
®
.
®
.
®
Report by clicking
®
. It shows the
®
.
®
87