Operation; Instrument Configuration (Set-Up Mode) - AEMC 8230 User Manual

Press the ON/OFF
indicating the instrument's software version and serial number.
If there is no AC power supply, the instrument operates on batteries. The instru-
ment's batteries are charged when it is connected to a 120/240; 60/50Hz line.
4.1 Instrument Configuration
NOTE: All configurations are available through the DataView
NOTE: The instrument must be configured the first time it is used and then when-
ever necessary, should your needs change. The configuration is saved when the
instrument is turned OFF.
Press the configuration
• Set the display language by using the ◄ and ► buttons.
• The parameter that is ready to be configured will be highlighted in yellow. To
move to a different parameter, use the ▲ and ▼ buttons.
20
CHAPTER 4

OPERATION

NOTE: Charge the instrument fully before use.
button to turn the unit ON. The startup screen appears
(Set-up mode)
button to configure the instrument.
DATE / TIME
CONTRAST / BRIGHTNESS
COLORS
CALCULATION METHOD
ELECTRICAL HOOKUP
CURRENT SENSORS
RECORDING
ALARMS
CLEAR MEMORY
ABOUT
FR EN DE
Figure 4-1
02/25/06
ES IT PO
Power Quality Analyzer Model 8230
software.
®