Configure the Agilent BootP Service
BootP Service starts automatically when your PC reboots. In order to add an
additional instrument or to change the configuration the service must be
stopped. After the changes have been applied, the service must be restarted.
1 To stop the BootP service:
Figure 32
2 Right click Agilent BootP Service.
3 Select Stop.
4 Close the Services and Administrative Tools windows.
5 To edit the BootP Settings go to Start >All Programs or All Apps > Agilent
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
LAN Communication, Installation, Connection and Configuration
For Windows 7: Start > Control Panel > System and Security >
Administrative Tools >Services.
For Windows 10: Right-click on Start and then select Control Panel >
System and Security > Administrative Tools > Services.
Services window
BootP Service > Edit BootP Settings. The BootP Settings screen appears.
Using the Agilent BootP Service
6
87