Agilent Technologies Cary 8454 Installation Manual page 12

1 Fast Installation
Installing Non-Preconfigured Agilent Cary 8454 UV-Visible Spectrophotometer Systems
12
Switch on the spectrophotometer (make sure sample area is clear) and wait
two minutes for the lamps to ignite. When you are ready to operate your
spectrophotometer, switch on the computer and printer.
For more information, see "Starting the Spectrophotometer" on page 27.
Install the Agilent ChemStation software.
For more information, see "Installing the Agilent ChemStation Using the
DVD" on page 63.
From the Windows Start menu, start the Agilent ChemStation software.
For more information, see "Starting the Agilent ChemStation Software" on
page 30.
Ensure that your software and spectrophotometer operate properly by
taking a blank measurement or performing the automatic self-test in the
diagnostic section of your software.
For more information, see "Operational Checkout" on page 30.
If you need information about solvents, sample preparation, blank
measurements, cuvette handling or how to insert a cuvette, see Chapter 3,
"Good Measurement Practices".
Install any accessories.
For simple accessories see Chapter 4, "Installing Accessories"; for complex
accessories, see the instructions supplied with the accessory or the
Installation and Maintenance section of the Agilent ChemStation online
help.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide