Long Path Cell Holder - Agilent Technologies Cary 8454 Installation Manual

4 Installing Accessories

Long Path Cell Holder

Long Path Cell Holder
The Agilent 89076A long path cell holder is a sample cell holder which can be
adjusted to hold most cylindrical and rectangular sample cells with path
lengths of up to ten centimeters. It uses the same mounting system as the
other sample cell holders.
Figure 16
The long path cell holder includes built-in cell stops for accurate positioning of
1, 2, 5, and 10-cm sample cells.
The optical filter wheel (08451-60302) can be mounted on the long path cell
holder in the same way it is mounted on other cell holders, see "Optical Filter
Wheel" on page 55 for details. However, instead of a screwdriver, a 2.5-mm hex
wrench is required to install the optical filter wheel on the long path cell
holder.
52
Cell stops
Long path cell holder
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide