Agilent Technologies Cary 8454 Installation Manual page 68

5 Installing the UV-Visible Software
Installing the Agilent ChemStation Using the DVD
9 Click Finish to complete the setup and reboot your system.
Restarting your system is required before you proceed.
NOTE
If you selected the G3770AA or G5182AA ECM access module, establish your ECM access
NOTE
using Internet Explorer before you first launch UV-Visible ChemStation.
During installation an administrator account ChemStationSystem is added to the PC. This
NOTE
administrator is created with a default password: ChemStation!1!System. If this password
does not meet the current password policy requirements then the installation will fail. To
proceed, temporarily turn off password requirements on the PC until the installation has
successfully completed and then change the ChemStationSystem password as required.
Administration of the ChemStationSystem Administrator Account
Administration of the ChemStation administrator (ChemStationSystem)
includes the following activities when the workstation is a PC on a domain:
1 Create a domain user named ChemStationSystem and make this user a
2 Give (NFTS-Permission) Full Control for ChemStationSystem on the
68
local administrator.
following directories and files (see below for instructions):
• C:\Chem32
• C:\Chem32\core
• C:\Chem32\uvexe
• C:\Chem32\1
• C:\Chem32\2
• C:\Chem32\3
• C:\Chem32\4
• C:\Chem32\TMP
• C:\Chem32\NonInst
• C:\Windows\ChemStation.ini
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide