Agilent Technologies Cary 8454 Installation Manual page 73

3 Click OK to enter your selections and to return to the main menu.
4 If you want to change the color of a screen element:
5 If you want to add new instruments:
6 Choose Save from the File menu to save your configuration.
7 Choose Exit from the File menu to close the Configuration Editor.
8 To set parameters for the accessories you have installed and configured,
Autosamplers
If you have an Agilent XY autosampler, your Agilent ChemStation software
requires a special driver and a cable. See the readme.txt for further
information.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
• Click OK to complete the instrument configuration.
If you configure more than one instrument, you must ensure that each
instrument has a unique LAN address. You can configure up to four
spectrophotometers.
Choose Colors from the Configuration menu, select that element under
Screen Elements, then select a color from those shown below in the
Standard Colors or Custom Colors list box. Your changes will appear in the
Screen Elements list box. You can create custom colors and add these, use
the Add Custom Colors... button and follow the instructions available with
the Help.
Choose Add New Instrument from the Add/Delete menu to add a new
instrument window to the Configuration Editor screen. Follow the above
procedure to configure the instrument. Choose Delete Instrument from the
Add/Delete menu to remove an instrument from the configuration.
refer to the Help in the UV-Visible ChemStation software.
Installing the UV-Visible Software
Installing the Agilent ChemStation Using the DVD
5
73