Installing Software Only - Agilent Technologies Cary 8454 Installation Manual

Installing Software Only

Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
Unpack the software—check for damage and check the contents against the
packing list.
Ensure that your computer and printer meet the requirements for proper
operation of the software.
For more information, see "Minimum PC Requirements for
Agilent ChemStation" on page 60.
Switch on the spectrophotometer (make sure the sample area is clear) and
wait two minutes for the lamps to ignite. When you are ready to operate
your spectrophotometer switch on the computer and printer.
From the Windows menu install the Agilent ChemStation software.
For more information, see "Installing the Agilent ChemStation Using the
DVD" on page 63.
From the Windows Start menu start the Agilent ChemStation software.
For more information, see "Starting the Agilent ChemStation Software" on
page 30.
Ensure that your software and spectrophotometer operate properly, by
taking a blank measurement or by performing the automatic self-test in the
diagnostic section of your software.
For more information, see "Operational Checkout" on page 30.
Fast Installation
Installing Software Only
1
13