Installing Your Computer; Setting Up The Computer - Agilent Technologies Cary 8454 Installation Manual

2 Installation and Start Up

Installing Your Computer

Installing Your Computer

Detailed instructions for installing your computer are specific to the type and
configuration of the computer and are provided with it. This section gives a
checklist of the main installation procedures; refer to the documentation that
was delivered with your computer for detailed information.

Setting up the computer

26
If you have any additional accessories, install them before you set up your
computer:
• Additional memory, refer to your computer documentation.
• Additional mass storage devices (hard disk drive, tape drive, DVD), refer
to your computer documentation.
• Accessory boards excluding USB to GPIB interface, refer to your
computer documentation.
Connect the keyboard and mouse to the sockets at the back of the computer.
Locate the PC keyboard and mouse for ergonomically correct access.
Connect the display unit to the video socket at the back of the computer.
Connect the printer cable to the socket on the printer and to the correct
printer interface socket on the back of the computer.
Connect your LAN cable from the spectrophotometer to the LAN connector
on the computer.
For correct setup, see Chapter 6, "LAN Communication, Installation,
Connection and Configuration".
Connect the power sockets to the computer, display and printer, and switch
them on. Follow the instructions for setting up the computer in your
computer documentation.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide