LAN Communication, Installation, Connection and Configuration
6
Connecting the Spectrophotometer to the PC
Use standard twisted
pair LAN cables for the
connections.
Personal computer
Network Switch
Instruments
Figure 29
LAN connection using a switch
Setting the IP Address of the Spectrophotometer
The IP address of the LAN interface card inserted to the spectrophotometer
can be assigned by using the Agilent Bootp service. This service assigns the
LAN interface card with a configured IP address, each time an IP address is
requested. Refer to the next section "Using the Agilent BootP Service" on
page 82.
If the system is on an isolated LAN and the default IP address 192.168.254.11 for the
NOTE
spectrophotometer is used, BootP is not necessary.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
81