Unpacking Your Spectrophotometer - Agilent Technologies Cary 8454 Installation Manual

2 Installation and Start Up

Unpacking Your Spectrophotometer

Unpacking Your Spectrophotometer

Upon receipt of your spectrophotometer, computer and printer, inspect the
shipping containers for any signs of damage. If the containers or cushioning
material are damaged, save them until the contents have been checked for
completeness and the spectrophotometer, computer or printer have been
mechanically and electrically checked. If the shipping container or cushioning
material is damaged, notify the carrier as well as Agilent Technologies. Save
the shipping material for the carrier's inspection.
Check the contents of the shipping container against the list below. If any
items are missing or obviously damaged, call Agilent Technologies.
To avoid injury to personnel or damage to equipment, always use a two or more
WARNING
people or suitable lifting device when moving the instrument.
20
Unpack the spectrophotometer. You should have the following components:
• Power cord to connect the spectrophotometer to line power.
• LAN Interface, if you connect the spectrophotometer through a LAN
• Waste tubing to connect the sample pan of your spectrophotometer to a
waste container.
• Checkout sample (caffeine solution).
Unpack the computer and its accessories. You should have the following
components:
• Computer and power cable
• Keyboard
• Mouse
• Display unit, connecting cable and power cable
• Printer, connecting cable and power cable
• Printer accessories, for example, ink cartridge in case of a DeskJet
printer
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide