Agilent Technologies Cary 8454 Installation Manual page 88

6 LAN Communication, Installation, Connection and Configuration
Using the Agilent BootP Service
6 To edit the TabFile, select Maintain bootp tabfile?
7 Select Do you want to log bootp requests?
8 Perform your necessary changes by e.g. creating a log file entry of a new
9 Deselect Do you want to log bootp requests?
10 Click OK to save the values or Cancel to discard them. The program ends.
11 To restart the BootP Service:
12 Right click Agilent BootP Service.
13 Select Start.
14 Close the Services and Administrative Tools screen.
15 This completes the configuration.
88
When this screen opens the first time, the default settings from installation
are displayed.
The default tab file was created at installation and is located at Program
Files\Common Files\Agilent Shared\BootP\bin\TabFile. It contains
configuration information entered on this screen.
If necessary you can
• change the BootPtab File Location by using the browse button on the
right (a valid BootP tabfile must exist).
• create your own template for the tabfile by selecting Create template
BootP tabfile? and click Create Template.
The default log file was created at installation and is located at Program
Files\Common Files\Agilent Shared\BootP\bin\LogFile. It contains an
entry for every time a device requests configuration information from
BootP.
If necessary you can change the BootPlog File Location by using the browse
button on the right (a valid BootP tabfile must exist).
instrument and edit the new instrument using the Launch Manager.
For Windows 7: Start > Control Panel > System and Security >
Administrative Tools >Services.
For Windows 10: Right-click on Start and then select Control Panel >
System and Security > Administrative Tools > Services.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide