Agilent Technologies Cary 8454 Installation Manual page 65

• Make sure an operating system, supported by your revision of the Agilent
If ChemStation is already installed and you are only adding a new module (also called an
NOTE
Add-on), you must ensure the following conditions are met before following the procedure
below. If you are installing ChemStation and all modules at the same time, skip to the
installation procedure.
Prerequisites to Install a New Module to Existing ChemStation Software
1 Be logged in as a local administrator such as ChemStationSystem.
2 Have Full Control access to the following:
Installing or Upgrading ChemStation
1 Insert the Agilent UV-Visible ChemStation Products DVD into the DVD
2 Click the Search or Cortana icon in the Windows 10 taskbar or Windows 7
3 At the command line, type diskdrive:\Setup.exe (for example, D:\
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
UV-Visible ChemStation software, is available on the target PC.
• C:\Chem32
• C:\Chem32\core
• C:\Chem32\uvexe
• C:\Chem32\1
• C:\Chem32\2
• C:\Chem32\3
• C:\Chem32\4
• C:\Chem32\TMP
• C:\Chem32\NonInst
• C:\Chem32\ChemStation.ini
drive.
Start menu. Type "Run". Select Run.
Setup.exe), then click OK.
Installing the UV-Visible Software
Installing the Agilent ChemStation Using the DVD
5
65