Additional Preparations On 3D X-Ray Units; Preparing Planmeca Romexis - Planmeca ProMax User Manual

4.3 Additional preparations on 3D X-ray units

1. Non-rotating tube head:
Remove 3D sensor from C-arm
(refer to section "Removing
sensor from C-arm" on page
10)
4. Joint: Tube head rotates to
ceph position

4.4 Preparing Planmeca Romexis

User's manual
If your X-ray unit has a non-rotating tube head, you must remove the 3D
sensor from the C-arm before you can take cephalometric exposures.
2. Rotating tube head: No need
to remove 3D sensor
5. 3D unit C-arm
First select the patient.
4 Preparations for exposure
3. No joint: Tube head does not
rotate
Planmeca ProMax 15