Exposure Switch; Emergency Stop Button - Planmeca ProMax 2D User Manual

6.6 Exposure switch

Exposure switch
Exposure button
1) Flashing green =
Getting ready
2) Continuous green =
Ready
3) Yellow = Radiation

6.7 Emergency stop button

User's Manual (2D)
The exposure switch can be mounted on the wall, or it can
be hung from the hook provided on the stationary column
top if a protected area is within reach.
Green lights flash on the exposure button and on the
touch screen when the X-ray system is getting ready for
an exposure. The green lights stop flashing and stay on
continuously when the X-ray system is ready for an
exposure.
During exposure yellow radiation warning lights illuminate
on the exposure switch and on the touch screen. They
indicate that the X-ray unit is generating radiation.
The emergency stop button is located on the top of the
stationary column. Press the button to stop the X-ray unit
operating in an emergency. When the emergency stop
button is pressed down, all movements of the X-ray unit
are blocked and the unit will not generate radiation. The
up / down movement will stop within a distance of 10 mm
(0.4 in.).
A help message will appear on the touch screen. Guide
the patient away from the X-ray unit. Then release the
emergency stop button. The X-ray unit will automatically
restart.
Planmeca ProMax 2D & 3D s & 3D Classic
6 MAIN PARTS
13