Receiving A Configuration Data And Starting A Diagnosis Function - JRC JCY-1800 Instruction Manual

4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual

4.2. Receiving a configuration data and starting a diagnosis function

4.2.1. Receiving a configuration data of RCU
Start a maintenance operation from receiving a configuration data.
1) Click the [Receive] button.
2) Confirm the completion of reception with a progress bar.
4.2.2. Starting the diagnosis function
The state of VDR/S-VDR system and OK/NG of receiving data can be displayed by the color of
"Diagnosis" lamps. A diagnostic result is displayed as follows.
●
(Green):
●
(Red):
● (Orange):
1) Click the [Diagnosis] button.
2) Confirm that the color of [Diagnosis] button changes a green color.
* When the [Diagnosis] button is clicked during operating a diagnosis function, it is stopped.
DOC No. 7ZPNA4014
OK
NG
Under a diagnosis
12