JRC JCY-1800 Instruction Manual page 56

4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.5.6.4. Diagnostic result of analog signal
Enter a diagnostic result manually.
1) Dialog for entering a diagnostic result
Click the [A/D Check] button.
The dialog for entering a diagnostic result will appear.
2) Connection of analog signals
Check that the A/D-conversion value of the connected analog signal is recorded.
Enter the diagnostic result to radio button (Good/No Good).
3) Sentence setup
Check that the conversion value is an appropriate value.
Enter the diagnostic result to radio button (Good/No Good).
4) Comment
Enter a comment at NG.
DOC No. 7ZPNA4014
50