Nmea Monitor - JRC JCY-1800 Instruction Manual

7. Real time Monitor (Menu)
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual

7.2. NMEA monitor

Monitor the NMEA sentence data, and check the sentence specified by the installation drawings is collected correctly.
7.2.1. Monitor conditions setup
Set up the monitor conditions.
When the PC of low specification is used, monitor every 1 CH.
If the monitoring of two or more CH(s) is carried out simultaneously, the rate of a CPU load becomes 100%,
and operation becomes impossible.
When operation is impossible, the task manager of Windows is started by <Alt>+<Ctrl>+ <Delete>.
Terminate the maintenance software.
7.2.1.1. Selecting the monitor channel
Select the CH to monitor.
Click the CH to monitor from the pull down menu.
DOC No. 7ZPNA4014
98