4.5.5.9. Diagnostic result of dry contact signal
Enter a diagnostic result manually.
1) Dialog for entering a diagnostic result
Click the [DSC Check] button.
The dialog for entering a diagnostic result will appear.
2) Connection of dry contact signals
Check that monitor icons (lamp, door) change according to the change of state of dry connected contact signals.
Enter the diagnostic result to radio button (Good/No Good).
3) Sentence setup
Check that the logic of a dry contact signal is correct.
• Alarm
• Door
Enter the diagnostic result to radio button (Good/No Good).
4) Comment
Enter a comment at NG.
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
Normal: Green lamp / Abnormal: Red lamp
A door icon means a state of door (Open/Close).
4. Installation, Setup and Check
45
DOC No. 7ZPNA4014