11. Frame Grabber Board (CKA-137) setup - FGB utility -
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
11.3. Tuning
Tune in the following order.
1) Sync polarity tuning
2) Horizontal position tuning
3) Vertical position tuning
4) Sampling Phase tuning
11.3.1. Sync polarity tuning
a) Click [Information (I)] -> [ADC status] menu.
"ADC.txt response" window appears.
b) Click the [No] button.
"ADCtxt_Analysis Function" window appears.
c) Check the H sync polarity.
If measured H sync polarity same as that the setup, step to next section.
If not same as that setup, step to d).
DOC No. 7ZPNA4014
Measured value
Setup value
126