Modified Setup Indicating - JRC JCY-1800 Instruction Manual

5. SYSTEM Screen
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual

5.3. Modified setup indicating

On a SYSTEM screen, when the setup data is modified, the modified item is indicated by red.
Furthermore, the button which should be operated to activate modification is indicated by red.
5.3.1. Connection setup, [SET] button
If the check box is changed, the item color is changed from black to red and the [Set] button blinks red.
The red indication means that the item data is not set up to the RCU yet.
The indications are returned from red to black after the revised data set up to the RCU.
5.3.2. [Reboot] button
The [Reboot] button blinks red when the RCU is rebooted for operating the modified setup data.
Click the [Reboot] button. The indications are returned from red to black after rebooting the RCU.
Caution: Even if the [Reboot] button blinks in red, it is not necessary to click immediately.
After all setup is completed, reboot the RCU, and check an operation of the VDR/S-VDR.
DOC No. 7ZPNA4014
84
blinks red
blinks red