JRC JCY-1700 Instruction Manual
  1. Manuals
  2. Brands
  3. JRC Manuals
  4. Data Loggers
  5. JCY-1700
  6. Instruction manual
JRC JCY-1700 Instruction Manual

JRC JCY-1700 Instruction Manual

Vdr/s-vdr cyc-311a playback software
Hide thumbs
Table of Contents

Advertisement

Quick Links

CYC - 311A Playback Software
CYC
311A Playback Software
Instruction Manual
Instruction Manual
JCY-1700/S
JCY-1700/S
VDR/S - VDR
VD
Version 2.0
Version 2.0
VDR

Advertisement

Table of Contents
loading

Related Manuals for JRC JCY-1700

Summary of Contents for JRC JCY-1700

  • Page 1 JCY-1700/S JCY-1700/S VDR/S - VDR CYC - 311A Playback Software 311A Playback Software Instruction Manual Instruction Manual Version 2.0 Version 2.0...

  • Page 3: Introduction

    Introduction ＜Introduction＞ This software is intended to help analyze the data recordings that are stored in a capsule or PC card of VDR/S-VDR installed onboard. This software chronologically plays back all the data including the radar image, bridge and VHF communication audios recorded in VDR/S-VDR.

  • Page 4: Before Using

    Before Using ＜Before Using＞ Icons This manual and product employ various icons to enable users to use the product safety and correctly, and to prevent any harm to users or others, and to prevent damage to the property. The icons and the meanings are indicated below. Incorrect use of the equipment by ignoring this icon may cause death or a WARNING seruous injury.

  • Page 5: Notes On Using

    Notes on Using < Notes on Using > Do not disassemble or remodel this equipment. Such action may cause fire, electric shock, or an equipment fault. Do not use any AC/DC adaptor other than attachment. Such action may cause fire, electric shock, or an equipment fault. Do not use any power supply voltage other than the specified voltages.
  • Page 6 Notes on Using CAUTION Do not install the equipment in the location affected by water, humidity, dust, or soot. It may become the cause of fire, electric shock, or a fault. Do not put in from a vent foreign substance, such as metal or a thing which is easy to burn. It may become the cause of fire, electric shock, or a fault.

  • Page 7: Table Of Contents

    Contents ＜Contents＞ ＜Introduction＞......................i ＜Before Using＞ ......................ii < Notes on Using > ...................... iii Chapter1 Outline......................1 1.1 Operation flow .............................1 Chapter2 Installing Playback Software............... 3 2.1 PC specification...........................3 2.2 How to install ............................4 2.3 How to uninstall ..........................30 Chapter3 Connecting PC to VDR/S-VDR ..............
  • Page 8 Contents 6.6 To set playback time ..........................48 6.6.1Setting playback time by Slide bar ....................48 6.6.2 Setting playback time by [Forward] button or [Rewind] button ............49 6.6.3 Setting playback time by [Clock] button ..................49 6.7 To change a playback speed ......................50 6.8 To adjust Volume and select audio source ..................51 6.9 Voyage screen...........................52 6.9.1 Graphic screen ...........................53...
  • Page 9 Contents Chapter8 Copying Recorded Data in PC Card ............85 8.1 How to eject PC card from VDR/S-VDR ....................85 8.2 How to play back PC card data in VDR/S-VDR.................87 8.2.1 Creating a playback folder ......................87 8.2.2 Setting required information for playback with the Setup software ..........87 8.2.3 Copy a recorded data of PC card....................91 Chapter9 Trouble Shooting..................
  • Page 10 Contents Blank Page Playback Software / Instruction Manual viii...

  • Page 11: Chapter1 Outline

    Chapter1 Outline Chapter1 Outline This software intends to be used for playing back recorded data required the International Standard in a protected capsule or a PC card of VDR/S-VDR equipment. Record data ・Configuration data of VDR/S-VDR ・Sensor data ・Bridge audio and VHF communication ・Radar image 1.1 Operation flow ①...
  • Page 12 Chapter1 Outline Blank Page Playback Software / Instruction Manual...

  • Page 13: Chapter2 Installing Playback Software

    Chapter2 Install Playback software Chapter2 Installing Playback Software 2.1 PC specification Confirm the following system requirement on your PC. Windows XP Professional or Home Edition Windows Vista (SP1) Windows 7 Minimum Pentium M Processor730 1.6GHz or Higher Windows XP Minimum 512MB Windows Vista / Windows 7 Minimum 1GB Minimum 40GB...

  • Page 14: How To Install

    The following contents are possible to refer in the web screen. Note ・ Playback software instruction manual ・ CSV Conversion instruction manual ・ JCY-1700 VDR instruction manual ・ JCY-1700 S-VDR instruction manual ・ Basic Instruction for Downloading Data from VDR/S-VDR Playback Software / Instruction Manual...
  • Page 15 Chapter2 Install Playback software The Instruction of how to install in Windows Vista and Windows 7 PC Note ・ In order to install Playback Software, always login PC as administrator, and execute the installation. ・ Insert Installation CD-ROM in CD drive. After a while, AUTORUN function starts up and the following screen displays.
  • Page 16 Chapter2 Install Playback software (3) The preparation for the installation are started. (4) The opening screen is indicated, and click [Next] button. (5) The Install Shield Wizard for the Playback software starts, and click [Next] button. Playback Software / Instruction Manual...
  • Page 17 Chapter2 Install Playback software (6) The confirmation screen where the installation folder and user information are shown is indicated, and click [Install] button. Install is started, and progress bar is indicated. The Install Shield Wizard completion screen is indicated, and click [Finish] button. Playback Software / Instruction Manual...
  • Page 18 Chapter2 Install Playback software Please eject the Install CD-ROM from the CD drive, and keep the Installation CD-ROM carefully. Note The install CD-ROM of the Playback software is kept on the back side of the VDR/S-VDR equipment door. After installing the software, please return the CD to the place. (10) Since Playback software partially uses network communication, disable the firewall function on your PC in accordance with the following procedure.
  • Page 19 Chapter2 Install Playback software ・Select “Off (not recommended)”, and click [OK] button. Off (not recommended) Playback Software / Instruction Manual...
  • Page 20 Chapter2 Install Playback software ●For Windows Vista ・Click [Start] button and then click “Control Panel”. Control Panel ・Click “Security”. Security ・Click “Turn Windows Firewall on or off”. Turn Windows Firewall on or off ・Select “Off (not recommended)”, and click [OK] button. Off (not recommended) Playback Software / Instruction Manual...
  • Page 21 Chapter2 Install Playback software ●For Windows 7 ・Click [Start] button and then click “Control Panel”. Control Panel ・Click “System and Security”. System and Security ・Click “Windows Firewall”. Windows Firewall ・Click “Turn Windows Firewall on or off”. Turn Windows Firewall on or off Playback Software / Instruction Manual...
  • Page 22 Chapter2 Install Playback software ・Select “Turn off Windows Firewall (not recommended)”, and click [OK] button. Turn off Windows Firewall (not recommended) Playback Software / Instruction Manual...
  • Page 23 Chapter2 Install Playback software (11) Set power option so that your PC does not enter system standby (sleep) or hibernation while operating Playback software. ●For Windows XP ・Click “Performance and Maintenance” in the Control Panel screen. Performance and Maintenance ・Click “Power Option”. Power Option ・Select ”Never”...
  • Page 24 Chapter2 Install Playback software ●For Windows Vista ・Click “System and Maintenance” on the Control Panel screen. System and Maintenance ・Click “Change when computer sleeps”. Change when computer sleeps ・Click “Change advanced power setting”. Change advanced power setting Playback Software / Instruction Manual...
  • Page 25 Chapter2 Install Playback software ・Select ”Never” for ” Plugged in” of “Hard disk”, “Sleep after”, and “Hibernate after” and click [OK] button. Hard disk Sleep after Hibernate after Playback Software / Instruction Manual...
  • Page 26 Chapter2 Install Playback software ●For Windows 7 ・Click “System and Security” on Control Panel screen. System and Security ・Click “Change when computer sleeps”. ・Click “Power Options”. Power Options ・Click “Change plan settings”. Change plan settings Playback Software / Instruction Manual...
  • Page 27 Chapter2 Install Playback software ・Click “Change advanced power settings”. Change advanced power settings ・Set “Turn off hard dick after”, ”Sleep after” and “Hibernate after” to “Plugged in Never”, click [OK] button. Turn off hard dick after Sleep after Hibernate after Playback Software / Instruction Manual...
  • Page 28 Chapter2 Install Playback software (12) For notebook or laptop PC, set as follows so that PC does not enter sleep mode when closing the lid. ●For Windows XP ・Click “Performance and Maintenance” on the Control Panel screen. Performance and Maintenance ・Click “Power Option”.
  • Page 29 Chapter2 Install Playback software ●For Windows Vista ・Click “Mobile PC” on the Control Panel screen. Mobile PC ・Click “Change what closing the lid does”. Change what closing the lid does ・Select “Do nothing” under “Plugged in” of “When I close the lid” and click [Save changes] button.
  • Page 30 Chapter2 Install Playback software ●For Windows 7 ・Click “System and Security”. System and Security ・Click “Choose what closing the lid does”. Choose what closing the lid does ・Set “When I close the lid” to “Do nothing”, click [Save changes] button. When I close the lid [Save changes] button Playback Software / Instruction Manual...
  • Page 31 Chapter2 Install Playback software (13) If the operating system (OS) on your PC is not Japanese or English version, Playback software might not display correctly. Please set language to "English (United States)" or "English (United Kingdom)" as follows. ●For Windows XP ・Click “Date, Time, Language, and Regional Options”...
  • Page 32 Chapter2 Install Playback software ・Select “Regional Option” tab and select “English (United States)” or “English (United Kingdom)”. Regional Option tab English (United States) or English (United Kingdom) ・Select “Advanced” tab. Select “English (United States)” or “English (United Kingdom)”, then click [OK] button. You will be asked to restart Windows, and then restart it.
  • Page 33 Chapter2 Install Playback software ●For Windows Vista ・Click “Clock, Language, and Region” on Control Panel screen. Clock, Language, and Region ・Click the “Regional and Language Options”. Regional and Language Options Playback Software / Instruction Manual...
  • Page 34 Chapter2 Install Playback software ・Select “Format” tab and select “English (United States)” or “English (United Kingdom)”. Format tab English (United States) or English (United Kingdom) ・Select “Administrator” tab. Click [Change system locale] button, and select “English (United States)” or “English (United Kingdom)”, and then click [OK] button.
  • Page 35 Chapter2 Install Playback software ●For Windows 7 ・Click “Clock, Language, and Region” on Control Panel screen. Clock, Language, and Region ・Click “Regional and Language Options”. Regional and Language ・Select “Administrative” tab. Click [Change system locale] button, and select “English (United States)” or “English (United Kingdom)”, and then click [OK] button.
  • Page 36 (14) For Windows Vista PC or Windows 7, since Playback software has to start by the administrator user continually, set as follows. ●For Windows Vista ・Right-click the “JCY-1700 VDR Playback” icon on desktop. ・Select “Properties”. Properties ・Select the “Compatibility” tab.
  • Page 37 Chapter2 Install Playback software ・Input “✓” mark in “Run this program as an administrator” under “Privilege Level”, and click [OK] button. Privilege Level The setup for Windows Vista PC is completed above. After installation also, always login as administrator user and use Note Playback software.
  • Page 38 Chapter2 Install Playback software ●For Windows 7 ・Right-click the “JCY-1700 VDR Monitor” icon on desktop. ・Select “Properties”. Properties ・Select “Compatibility” tab. Compatibility tab Playback Software / Instruction Manual...
  • Page 39 Chapter2 Install Playback software ・ Input “✓” mark in “Run this program as an administrator” under “Privilege Level”, and click [OK] button. Privilege Level The setup for Windows 7 PC is completed above. After installation also, always login as administrator user and use Note Playback software.

  • Page 40: How To Uninstall

    ・Click “Add or Remove Programs”. Add or Remove Programs ・Select the JCY-1700 VDR Playback and click [Remove] button. JCY-1700 VDR Playback ・Since some files remain in the installation folder after completing the uninstallation, open My Computer and delete the folder.
  • Page 41 ・Click [Yes] button. ・Since some files remain in the installation folder after completing the uninstallation, open My Computer and delete the folder. Installation folder: C:\Program files\JRC\JCY1700\VDR_ Playback (32bits OS) C:\Program files (x86)\JRC\JCY1700\VDR_ Playback (64bits OS) Playback Software / Instruction Manual...
  • Page 42 ・Click [Yes] button. [Yes] button ・Since some files remain in the installation folder after completing the uninstallation, open My Computer and delete the folder. Installation folder: C:\Program files\JRC\JCY1700\VDR_ Playback (32bits OS) C:\Program files (x86)\JRC\JCY1700\VDR_ Playback (64bits OS) Playback Software / Instruction Manual...

  • Page 43: Chapter3 Connecting Pc To Vdr/S-Vdr

    Chapter3 Connecting PC to VDR/S-VDR Chapter3 Connecting PC to VDR/S-VDR (1) Open the door with key, and connect a LAN cable to the” HUB” port of VDR/S-VDR. HUB unit Playback Software / Instruction Manual...
  • Page 44 Chapter3 Connecting PC to VDR/S-VDR Blank Page Playback Software / Instruction Manual...

  • Page 45: Chapter4 Downloading Recorded Data From Vdr/S-Vdr

    Chapter4 Downloading Recorded Data from VDR/S-VDR 4.1 Downloading Recorded Data from VDR/S-VDR by Download Software (1) Click the JCY-1700 VDR Playback icon on the desktop. The icon is created automatically after installation. (2) Click [DOWNLOAD] button from “VDR INVESTIGATIVE SOFTWARE” launcher menu, and start the download software.
  • Page 46 Chapter4 Downloading Recorded Data from VDR/S-VDR (4) Select a storage media (data source) for downloading the recorded data. • Internal storage (PC Card) ← Protected data by user operation at accident •Capsule ← Recorded data Captain stops the recording to the “Internal storage (PC Card)” after accident. Therefore the recorded data for investigation is stored in the “Internal storage (PC Card)”.
  • Page 47 Chapter4 Downloading Recorded Data from VDR/S-VDR (6) Set download value with the slide bar. In downloading all recorded data, enter a check mark into a check box of "All". Note) Download data size can be specified in every 1 percent with slide bar. (7) Click [Start] button.

  • Page 48: Folder Composition

    Chapter4 Downloading Recorded Data from VDR/S-VDR 4.2 Folder Composition Location to save (e.g. Desktop) Save folder (e.g. YYYYMMDDhhmmss: year/month/day/hour/minute/second） Playlist1 (not selectable) Playlist2 Init Audio Visual Playlist3 Playlist10 Playback Software / Instruction Manual...

  • Page 49: Chapter5 Setup For Playback Software

    Chapter5 Setup for Playback Software Chapter5 Setup for Playback Software In order to start Playback software, Setup is required. When Playback software is started and the following warning screen is indicated, setup is not completed. Refer to “Chapter 7 for Converting Recorded Data into Industry Standard Formats”. The Conversion software can convert recorded data in PC card and Capsule into Industry Standard Formats.
  • Page 50 Chapter5 Setup for Playback Software (3) The Login screen is indicated, and click [OK] button after confirming that “User” is selected in the Operator block. User (4) The Setup for User screen is indicated. Click [Import] button. [Import] button Playback Software / Instruction Manual...
  • Page 51 Chapter5 Setup for Playback Software (5) As “Open” screen displays, select and open SysInfo.dat (VDR composition information) file, that is VDR/S-VDR recorded data downloaded at Section 4.1. The Sysinfo.dat file is downloaded in the following location. ＊\YYYYMMDDhhmmss\Playlist2\VDR \Init\SysInfo.dat Download folder The folder specified at Chapter 4, Section 4.1 (7) Note Click [Import] button and import “SysInfo.dat “file.
  • Page 52 Chapter5 Setup for Playback Software (7) Click [Folder Selection] button, and select a folder created in accordance with the “Chapter 4 Downloading Recorded Data from VDR/S-VDR”. Folder Selection button (8) Click [Set] button, and setup is completed. To close the Setup software, click [Close] button. Playback Software / Instruction Manual...

  • Page 53: Chapter6 Playback Operation

    Chapter6 Playback Operation Chapter6 Playback Operation 6.1 How to start up the Playback software (1) Click [PLAYBACK] button from “VDR INVESTIGATIVE SOFTWARE” launcher menu. [PLAYBACK] button (2) Click [PLAYBACK] button from “PLAYBACK” launcher menu. [PLAYBACK] button (3) Playback screen displays. Playback Software / Instruction Manual...

  • Page 54: How To Exit The Playback Software

    Chapter6 Playback Operation 6.2 How to exit the Playback software (1) Click [Setup] button of bottom right in the playback screen and the Setup screen is indicated. [Setup] button (2) Click [Exit] button of bottom left in the Setup screen. [Exit] button (3) Click [OK] button in the Confirm window.

  • Page 55: Playback Screen

    Chapter6 Playback Operation 6.3 Playback screen The Playback screen is composed with Main Block, Status Block, Playback Operation Panel and Menu Block. Main Block Status Block Playback Operation Panel Menu Block Playback Software / Instruction Manual...
  • Page 56 Chapter6 Playback Operation The Playback screen has Voyage screen, Alarm/Status screen, AIS screen and Radar screen on the Main Block, and their screens are selected with buttons of the Menu Block. AIS screen does not display when AIS is not connected to VDR/S-VDR. Voyage Alarm/Status Menu Block...

  • Page 57: Playback Operation Panel

    Chapter6 Playback Operation 6.4 Playback Operation Panel Shows the function of buttons and sections. ① ⑩ ② ⑪ ③ ⑫ ④ ⑬ ⑤ ⑥ ⑦ ⑧ ③ ⑨ Name Function ① OLDEST time Show the oldest time of the recorded data. ②...

  • Page 58: To Start Playback, And To Stop

    Chapter6 Playback Operation 6.5 To start playback, and to stop To start playback, click [Playback] button. And to stop playback, click [Stop] button. Stop Playback 6.6 To set playback time Explain how to set playback time. 6.6.1Setting playback time by Slide bar If knob is slid, a playback time is forwarded or reversed according to the position.

  • Page 59: Setting Playback Time By [Forward] Button Or [Rewind] Button

    Chapter6 Playback Operation 6.6.2 Setting playback time by [Forward] button or [Rewind] button If [Forward] button is pressed, a playback time is forwarded. And the step time is increased by pressing the button continuously. If [Rewind] button is pressed, a playback time is reversed. And step time is increased by pressing the button continuously.

  • Page 60: To Change A Playback Speed

    Chapter6 Playback Operation (4) Selected date is indicated in the Playback time Slide bar select button Playback time (5) Click [Playback] button. (If playback is in progress, playback is restarted automatically without clicking [Playback] button.) If 12 hours of slide bar select button is set, time span is 12 hours after Note selected playback time.

  • Page 61: To Adjust Volume And Select Audio Source

    Chapter6 Playback Operation 6.8 To adjust Volume and select audio source If [Speaker] button is clicked, the Volume control screen appears. Speaker To adjust volume, slide up or down the volume knob. If exclude an unnecessary audio source, click the source and remove the “✓” mark. Moreover if the All mute is clicked and enter the “✓”...

  • Page 62: Voyage Screen

    Chapter6 Playback Operation 6.9 Voyage screen There are the Graphic screen and the Numeric screen in the Voyage screen. To change the screens, click [Voyage] button in the Menu block. Graphic screen Numeric screen Voyage Playback Software / Instruction Manual...

  • Page 63: Graphic Screen

    Chapter6 Playback Operation 6.9.1 Graphic screen The following explains Graphic screen. “*” mark displays when data in numeric indication are not recorded. “N.C” displays when the input equipment is not connected. Moreover, it becomes an invalid indication when all the items in the divided block have not been connected.
  • Page 64 Chapter6 Playback Operation 6.9.1.2 Rudder direction and heading block This block shows heading against rudder direction by graphic. The following figure is an example in case there is one rudder. The green line shows rudder. And the blue line shows heading by Gyro. Rudder direction Heading 6.9.1.3 Heading block...
  • Page 65 Chapter6 Playback Operation 6.9.1.4 Ship block (Voyage screen) This block shows status of propeller, rudder and speed by numeric and graphic under voyage. The following figure is an example in case there are 1 propeller and 1 rudder. If [Voyage/Docking] button is clicked, the Ship block is switched to the Docking screen. Refer to “6.9.1.5 Ship block (Docking screen)”...
  • Page 66 Chapter6 Playback Operation 6.9.1.5 Ship block (Docking screen) This block shows status of propeller, rudder, speed and thruster by numeric and graphic under docking. The following figure is an example in case there are 1 propeller, 1 rudders and 1 thruster. If [Voyage/Docking] button is clicked, the Ship block is switched to the Voyage screen.
  • Page 67 Chapter6 Playback Operation 6.9.1.6 Voyage Info block This block shows date, time, own ship’s position etc. by numeric. Playback Software / Instruction Manual...
  • Page 68 Chapter6 Playback Operation 6.9.1.7 Depth block This block shows Depth by numeric and graphic. The brown zone is seabed, and the light-blue zone is underwater. A horizontal axis shows lapsed time and shows the depth of water of the newest at right end.

  • Page 69: Numeric Screen

    Chapter6 Playback Operation 6.9.2 Numeric screen In numeric screen, all data of graphic screen are showed in numeric. “*“ mark displays if data in numeric indication have not yet received or illegal data are inputted, “N.C” displays when the input equipment is not connected. Playback Software / Instruction Manual...

  • Page 70: Alarm/Status Screen

    Chapter6 Playback Operation 6.10 Alarm/Status screen The Alarm/Status screen shows alarm information, status of engine telegraph, door status, water level and fire detection etc. This screen is composed 3 blocks of Alarm/Status, Category Menu and Alarm/Status Menu. To show door status e.g., click [Door] button from the Alarm/Status Menu. Moreover, to show about Steering gear e.g., click the Steering gear from the Category Menu.

  • Page 71: Radar Screen

    Chapter6 Playback Operation 6.11 Radar screen It is possible to view a Radar image captured every 15 seconds in this screen. It is prepared so that the icon and the menubar may effectively view the radar screens. If Radar Interfaces (Option Unit) are added, it is possible to view maximum 4 images. Playback Software / Instruction Manual...

  • Page 72: Icon

    Chapter6 Playback Operation 6.11.1 Icon Shows the function of buttons below. ① ④ ② ⑤ ③ ⑥ Name Function ① Zoom Out Available to contract a selected radar screen. ② Zoom In Available to expand a selected radar screen. ③ Tile Available to arrange radar screens like tiles.

  • Page 73: Ais Screen

    Chapter6 Playback Operation 6.12 AIS Screen There are the Graphic screen and List screen in the AIS screen. To select the screens, click [Graphic] button or [List] button. And simple information of own ship and AIS targets is indicated on right side. Graphic screen Simple Information...

  • Page 74: Graphic Screen

    Chapter6 Playback Operation 6.12.1 Graphic screen Centering on own ship, the state of AIS target is indicated on graphics by a symbol. Screen area is expanded or contracted by Range button. (Radius: from 0.75 to 24 nm) Range button Playback Software / Instruction Manual...
  • Page 75 Chapter6 Playback Operation Explains about symbols in the following table. Category Symbol Explain Own ship ・Solid line shows heading. ・ Dashed line shows COG(Course Over Ground). AIS Target ・Solid line shows heading. ・ Dashed line shows COG(Course Over Ground). If position report of a ship is not received more than a certain time, the symbol is indicated.

  • Page 76: List Screen

    Chapter6 Playback Operation 6.12.2 List screen Position report, ship's name, IMO number, call sign and length of hull etc are showed in this screen. It is indicated on near order from a top from own ship. Playback Software / Instruction Manual...

  • Page 77: Detail Information Of Own Ship

    Chapter6 Playback Operation 6.12.3 Detail Information of own ship If [Detail] button in the simple information block, the detail screen is indicated. Playback Software / Instruction Manual...

  • Page 78: Detail Information Of Ais Target

    Chapter6 Playback Operation 6.12.4 Detail information of AIS target If [Detail] button in the simple information block, the detail screen is indicated. Playback Software / Instruction Manual...

  • Page 79: To Confirm The Record Sentences In The Nmea Format

    Chapter6 Playback Operation 6.13 To confirm the record sentences in the NMEA format Available to confirm the record sentences in the NMEA format on the Dump screen. To open the Dump screen, operate as follows. (1) Click [Setup] button in the Menu Block. [Setup] button (2) Select the Maintenance tab in the setup and click [View] button.
  • Page 80 Chapter6 Playback Operation (3) Select a port No. in the combo box and click To view the record NMEA sentences, click [Start] button. To abort view, click [Stop] button. Shows the function of buttons below. ④ ③ ② ① ⑤ ⑥...

  • Page 81: To Print Screen

    Chapter6 Playback Operation 6.14 To print screen To print screen, click [Print] button in the MENU Block. [Print] button Note To print, it is necessary to install a printer driver in a used PC beforehand. Playback Software / Instruction Manual...

  • Page 82: To Confirm The Vdr/S-Vdr System Information

    Chapter6 Playback Operation 6.15 To confirm the VDR/S-VDR system information Available to confirm the VDR/S-VDR system configuration that is required in the International Standard on the VDR/S-VDR System Information screen. To open the VDR/S-VDR System Information screen, operate as follows. (1) Click [Setup] button in the Menu Block and select the Version tab.
  • Page 83 Chapter6 Playback Operation (3) The VDR/S-VDR System Information screen is opened. Shows the function of buttons below. ③ ② ① ④ Name Function ① Available to show the RCU system information on the screen. ② DAU1 Available to show the DAU1 system information on the screen. ③...

  • Page 84: How To Customize Screen Layout

    Chapter6 Playback Operation 6.16 How to customize screen layout It is possible to move, expand and reduce the Voyag1 and Voyage2 screens. And when [Setup] button is clicked, setting tabs of each block are indicated, and if a check mark of "Dialog"...
  • Page 85 Chapter6 Playback Operation (2/4) Corresponding Block Note Ship (Docking) Radar ・ Initially this block is shown on the Voyage2 screen only. Current / Wind Voyage Info Playback Software / Instruction Manual...
  • Page 86 Chapter6 Playback Operation (3/4) Corresponding Block Note Depth Graph ･It is possible to change a graph range in addition to selection of visible and invisible. ･It is possible to select “KEEL” mode or “WATER/TRANS/KEEL” mode. Engine Graph ･ Initially this block is not shown. If needed, change the dialog.
  • Page 87 Chapter6 Playback Operation (4/4) Corresponding Block Note ・ It is possible to change AIS target number and range in the AIS screen. System ・It is possible to select blue or black for background color. Playback Software / Instruction Manual...

  • Page 88: How To Restore To Initial Screen Layout

    Chapter6 Playback Operation 6.17 How to restore to initial screen layout It is possible to restore to initial screen layout by [Restore] button in the Maintenance tab. If the Voyage1 screen is restored, click [Restore] button after opening the Voyage1 screen. If the Voyage2 screen is restored, click [Restore] button on the Voyage2 screen.

  • Page 89: Chapter7 Converting Recorded Data Into Industry Standard Formats

    Chapter7 Converting Recorded Data into Industry Standard Formats Chapter7 Converting Recorded Data into Industry Standard Formats 7.1 Starting Conversion software (1) Click [CONVERT] button, so that conversion software starts up. [CONVERT] button (2) Conversion software screen displays. (3) Method for conversion Refer to Section 7.2, when converting all recorded data.

  • Page 90: Convert All Recorded Data

    Chapter7 Converting Recorded Data into Industry Standard Formats 7.2 Convert all recorded data (1) Click Folder Selection button in the “Source Folder,” and select “VDR” folder in the folder that recorded data are saved. ＊\YYYYMMDDhhmmss\Playlist2\VDR Recorded data folder The folder specified at Chapter 4, Section 4.1 (7) Folder Selection button Select the “*\Playlist2\VDR”.
  • Page 91 Chapter7 Converting Recorded Data into Industry Standard Formats (3) Click Folder Selection button in “Convert Folder”, and select “Convert_Data” folder as the destination of converted files. [Folder Selection] button Select the “\Convert_Data” on desktop. (4) Click [Convert]. When conversion starts, progress of conversion is indicated in progress bar. Also, converted files are indicated in list box.

  • Page 92: Convert Parts Of Recorded Data

    Chapter7 Converting Recorded Data into Industry Standard Formats (5) Stop converting Click [Cancel] button in order to stop converting. 7.3 Convert parts of recorded data (1) Click Folder Selection button in “Convert Folder”, and select “Convert_Data” folder as the destination of converted files. Folder Selection button (2) D rag and drop a part of recorded data into list box.
  • Page 93 Chapter7 Converting Recorded Data into Industry Standard Formats Drag & Drop Note In case of Windows Vista and Windows7, conversion operation by drag and drop is not available. Playback Software / Instruction Manual...

  • Page 94: Converted File (Industry Standard Formats Files)

    Chapter7 Converting Recorded Data into Industry Standard Formats 7.4 Converted file (Industry Standard Formats files) The Convert software creates the converted files as follows. Data File Name Note Digital Sensor Data YYMMDD,hhmmss,DD,????????.txt Audio YYMMDD,hhmmss,M1,????????.wav Mix MIC-CH1, CH2 and CH3 YYMMDD,hhmmss,M2,????????.wav Mix MIC-CH4, CH5 and CH6 YYMMDD,hhmmss,M3,????????.wav Mix MIC-CH7, CH8 and CH9...

  • Page 95: Chapter8 Copying Recorded Data In Pc Card

    Chapter8 Copying Recorded Data in PC Card Chapter8 Copying Recorded Data in PC Card Recorded data in PC card of VDR/S-VDR can be directly copied to PC, and copied data can be played back. Refer to the following procedure, in copying recorded data. 8.1 How to eject PC card from VDR/S-VDR Internal Operation Panel Operate the Internal Operation Panel as follows.
  • Page 96 Chapter8 Copying Recorded Data in PC Card Caution When data copying is finished, please be sure to insert a PC card to the VDR/S-VDR. If the PC card is continued to eject more than 10 minutes, “MEDIA ERROR” occurs in the VDR/S-VDR. Caution Please press [ACK] button in the VDR/S-VDR to stop the alarm.

  • Page 97: How To Play Back Pc Card Data In Vdr/S-Vdr

    (1) To create a playback folder, start My Computer. (2) Create a folder as follows. Playback data is copied to the folder made here. C:\MV JRC ↑ E.g. Ship name 8.2.2 Setting required information for playback with the Setup software (1) Click [PLAYBACK] icon from the “VDR INVESTIGATIVE SOFTWARE”...
  • Page 98 Chapter8 Copying Recorded Data in PC Card (3) The “Login” screen displays, and click [OK] button after confirming that “User” is selected in “Operator” block. User (4) The “Setup for User” screen displays. Playback Software / Instruction Manual...
  • Page 99 Chapter8 Copying Recorded Data in PC Card (5) Eject a PC card from VDR/S-VDR, and insert it into PC card slot on your PC. Click [Import] button and select the following file in the PC card in order to import VDR configuration information (SysInfo.dat).
  • Page 100 Chapter8 Copying Recorded Data in PC Card (7) Click Folder Selection button, and select the folder created at Section 8.2.1 Folder Selection button (8) Click [Set] button, and setup is completed. To close the Setup software, click [Close] button. Playback Software / Instruction Manual...

  • Page 101: Copy A Recorded Data Of Pc Card

    Chapter8 Copying Recorded Data in PC Card 8.2.3 Copy a recorded data of PC card (1) Click [PLAYBACK] button from “PLAYBACK” launcher menu in order to start Playback software. [PLAYBACK] button (2) Playback screen displays. (3) Click [Playlist] button on the Playback Operation Panel. Playlist button Playback Software / Instruction Manual...
  • Page 102 Chapter8 Copying Recorded Data in PC Card (4) Confirm the PC card drive is set in the Copy source. If the drive is not set, please click [Folder Select] button and select the drive. (5) Select a playlist in the Copy place, and click [Copy] button. Copy source Copy place Copy button...
  • Page 103 Chapter8 Copying Recorded Data in PC Card Caution If the PC card is continued to eject more than 10 minutes, “MEDIA ERROR” occurs in the VDR/S-VDR. Please press [ACK] button in the VDR/S-VDR to stop the alarm. The alarm is canceled automatically when the PC card is inserted in the VDR/S-VDR.
  • Page 104 Chapter8 Copying Recorded Data in PC Card Blank Page Playback Software / Instruction Manual...

  • Page 105: Chapter9 Trouble Shooting

    Chapter9 Trouble Shooting Chapter9 Trouble Shooting If the Playback software may be not normal or occur a error, please confirm the contents of this chapter before contact us Symptom Cause Action Download from the VDR/ Faulty wiring of LAN cable. Check the connections.
  • Page 106 Chapter9 Trouble Shooting Blank Page Playback Software / Instruction Manual...

  • Page 107: Chapter10 Appendix

    Chapter10 Appendix Chapter10 Appendix 10.1 How to stop capsule recording Unlock the key and open the door. Playback Software / Instruction Manual...

  • Page 108: Stop Recording

    Chapter10 Appendix Operate the Internal Operation Panel as follows. 10.1.1 Stop Recording (1) Push [REC STOP] button. (2) The RECORDING LED blinks for about 1 minute and put out lights, and then capsule recording stops. 10.1.2 Restarting Recording (1) Push [RESTART] button (2) The RECORDING LED lights up, and then capsule recording restarts.

  • Page 109: Sentence And Indication Place

    Chapter10 Appendix 10.2 Sentence and indication place (1/4) Screen Block Section Data Indication Unit Sentence Voyage1 Wind True Wind Direction xxx.x deg(°) $xxMWV Voyage2 Wind Speed xx.x kt, m/s （Graphic） Relative Wind Direction xxx.x deg(°) Wind Speed xx.x kt, m/s Rudder direction Rudder Starboard...
  • Page 110 Chapter10 Appendix (2/4) Screen Block Section Data Indication Unit Sentence Engine Telegraph Voyage1 Telegraph Position STOP ENGINE e.g. $xxETL Voyage2 SUB Telegraph S/B, F/A, F/E e.g. (Graphic) Ope.Location Bridge, Port wing, Starboard wing e.g. Propeller Cont. Single, Starboard, Wing e.g. Voyage Info DD/MM/YYYY $xxZDA...
  • Page 111 Chapter10 Appendix (3/4) Screen Block Section Data Indication Unit Sentence Depth Offset from transducer Depth(Water/Tran./ $xxDPT (Numeric) Keel) Depth xxx.x Heading True xxx.x deg(°) $xxHDT Speed Water STW (Water-reference) [AS/AH]xx.x $xxVBW and Ground SOG (Ground-reference) [AS/AH]xx.x Bow (The left and right in bow) [P/S]xx.x Stern (The left and right in stern) [P/S]xx.x...
  • Page 112 Chapter10 Appendix (4/4) Screen Block Section Data Indication Unit Sentence Engine order and Remote Port Revolution min-1 $xxPRC (Numeric) response control Pitch xxx.x deg(°) order Starboard Revolution min-1 Pitch xxx.x deg(°) Propeller Port Revolution min-1 $xxRPM response Pitch xxx.x deg(°) Starboard Revolution min-1...
  • Page 114 For further information,contact: Not use the asbestos http://www.jrc.co.jp Marine Service Department Telephone : +81-3-3492-1305 Facsimile : +81-3-3779-1420 tmsc@jrc.co.jp e-mail : AMSTERDAM Branch Telephone : +31-20-658-0750 Facsimile : +31-20-658-0755 e-mail : service@jrceurope.com SEATTLE Branch Telephone : +1-206-654-5644 Facsimile : +1-206-654-7030 e-mail : marineservice@jrcamerica.com...

This manual is also suitable for:

Jcy-1700s

Table of Contents