Setup Procedure; Register Information; Ip Address; Real Time Monitor Section - JRC JCY-1800 Instruction Manual

Voyage data recorder
Hide thumbs Also See for JCY-1800:
Table of Contents

Advertisement

12. Option System setup
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual

12.2. Setup procedure

1) Receive a setup data.
Click the [Receive] button.
2) Input the setup data
Select the output data to the real-time monitor.
3) Transmit the setup data
Click the [Set] button.

12.3. Register Information

Registrant information entered on the Log-in screen is displayed.
Registrant information which is stored in the RCU is displayed at receiving the configuration data.
Registrant information is updated to the data entered on the "Log in" screen after setting up.

12.4. IP Address

The VDR/S-VDR outputs real-time data to the set-up IP address.
1) Option PC
Input the IP address of monitor PC.
2)FGB2
The setup is required when the real-time monitor must receive the image data as three or four screens. Refer to the
[Real time Monitor Installation] guide for details.

12.5. Real Time Monitor section

Enter the check mark into the check box of necessary data.
Usually, since all data are required by the real-time monitor, all effective channels are inputted check marks as default
setup.
1) Sensor section
Only Connection CH can be set up.
Enter a check mark into a check box of each channel which must output a NMEA monitor data.
The NMEA sentence data of checked CH are outputted.
2) Audio
Enter a check mark into a check box of "AUDIO" for outputting an audio monitor data.
3) FGB1
Enter a check mark into a check box of "FGB1" for outputting an image monitor data from the VDR/S-VDR.
4) FGB2
This setup is required when the real-time monitor must receive the image data as three or four screens.
Refer to the [Real time Monitor Installation] guide for details.
5) Enable button
When the [Enable] button is clicked, all monitor channels will become effective.
A check mark is inputted into all check boxes.
6) Disable button
When the [Disable] button is clicked, all monitor channels will become null.
A check mark is removed from all check boxes.
DOC No. 7ZPNA4014
132

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jcy-1850

Table of Contents