Chapter 3 Starting And Stopping The System; Starting The System - JRC JCY-1900 Instruction Manual

Chapter 3 Starting and Stopping the
System
3.1

Starting the System

1. Start the Recording Control Unit (RCU)
1) Unlock and open the front door.
2) Turn on the POWER switch.
3) After approximately 2 minutes, make sure that the MCB's LED (SYS., REC.) lights up in
green.
SYS.
Figure 3-1 LED position of the MCB

Chapter 3 Starting and Stopping the System

REC.
Expansion
9