JRC JCY-1800 Instruction Manual page 128

11. Frame Grabber Board (CKA-137) setup - FGB utility -
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
11.2.2. Select the channel for tuning
a) Click the
If tuning the channel 2, click the
capture setting using [Ch 2 capture setting] menu, refer to next section.
The following message appears. This message appears at first connected to the board.
b) Click the [OK] button.
c) "Changed to channel 1" message appears on left below status bar.
11.2.3. Check the board measured Radar image format
Check the board measured Radar image format as bellow.
a) Click [Information (I)] -> [ADC status] menu.
The following message appears.
b) Click the [No] button.
"ADCtxt_Analysis Function" window appears.
DOC No. 7ZPNA4014
icon.
icon. And if "Ch2.txt NG" message appears, set the channel 2
122