JRC JCY-1800 Instruction Manual page 52

4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.5.6. Detail setup window of analog signal (A/D TAB screen)
It is a screen for setup analog signal.
The data which is inputted on the setup screen of each channel are displayed on this screen.
• Connection signal
• Current value
• Data unit
4.5.6.1. Setting connection of Analog signal
Enable / Disable of each Analog signal connection can be set up.
1) Each channel
Enter a check mark into the check box of connected CH.
Enable:
Disable:
4.5.6.2. Setting detail setup of Analog signal
1) Starting
Click the [channel] button of detail setup channel.
DOC No. 7ZPNA4014
[ ] (checked)
[ ] (unchecked)
46