4.5.6.2.4. Setting of Analog signal information
The specification and information of the analog signal are set up.
1) Data unit
Select the data unit of receiving data.
No.
00
01
02
03
04
05
06
07
08
2) Contents of connection data
Select the contents of connection data.
3) Conversion formula
The coefficients of the conversion formula are inputted automatically.
* Inputting manually is also possible.
Conversion formula
y=A1*10A2x+B1*10B2
y=Equivalent, x=A/D conversion value, A1, A2, B1, B2=Coefficient
4) Analog signal range
Select the analog signal range.
4.5.6.2.5. Setting detail setup of Analog signal
Set the setup data after completing all setup.
Click the [Set] button.
4.5.6.3.
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
Unit
-
deg
min-1
rpm
m/s
km/s
knots
MPa
Pa
49
4. Installation, Setup and Check
DOC No. 7ZPNA4014