2.2. Quitting the Maintenance software
2.2.1. Check before exit
Confirm the following items before logout when the installation is finished
1.
All Entry lamps shall light green in the System screen.
2.
All Diagnosis lamps shall light green in the System screen.
3.
Any error event shall not occur on real time Event monitor.
4.
The downloaded data from the capsule should be played back rightly.
5.
The copied data from the CF card should be played back rightly.
2.2.2. Quitting procedure
Click the [Log out] button on the left side of each screen.
The maintenance software is shut down after logging out from the VDR/S-VDR.
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
5
2. Maintenance Software starting
DOC No. 7ZPNA4014