JRC JCY-1800 Instruction Manual page 42

4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.5.5.4. Setup screen of sentence data
Dry contact data, such as alarm and a door, should be changed into a NMEA sentence data.
The screen for creating conversion table file will appear.
In editing not the configuration file that received from NCT-72/63 but the configuration file saved, use "Open" of a
File menu.
4.5.5.4.1. Registration of sentence data converted from dry contact signal
Sentence data are set up to each channel which connected dry contact signal.
● Connection CH
Select a channel which connected dry contact signal.
DOC No. 7ZPNA4014
(alarm, door, etc.)
36