JRC JCY-1800 Instruction Manual page 60

4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.6.3.1.2. Setup file of FGB
The setup file of FGB can be downloaded and uploaded.
The setup file of FGB is saved in the "FGB_Util¥CKA137-JCY1800" folder under an install folder of maintenance
software.
A target Radar model or image specification is made into the file name.
Select a correct setup file with reference to the following.
● Radar model
Cap2-JMA9900-1800.txt
Cap2
JMA9900
1800
● VESA
Cap2-1024x768-60Hz-1800.txt
Cap2
1024x768
60Hz
1800
4.6.3.1.3. Two Radar images recording mode
Select a recording mode in case of connecting two Radars
1) Recording a image switched
The switching record mode is selected in standard system.
Select the "Single Record by Switch" from the pull-down menu.
2) Recording both images
The both record mode can be selected in the option system.
The option system means a large storage capacity of a capsule and a CF card.
Both Radar images can be recorded in the large storage capacity.
Select the "Dual Record" from the pull-down menu.
4.6.3.1.4. In case of using Radar Interface Unit
The Radar Interface Unit should be installed, when the display resolution of connected Radar unit is a UXGA size.
1) Setting a Radar interface unit mode
• When the Radar Interface Unit is installed, select the "NWP-46" from the pull-down menu.
• Enter a serial number of NWP-46.
*Caution: The Radar interface unit has a cooling fan. Fan alarm is neglected by the "None" setting.
DOC No. 7ZPNA4014
"2" shows the object for FGB: CKA -137.
Reference:
When there is no numeric character (Cap-), the object for CKA-129 is shown.
Radar model
The object for JCY-1800/1850 is shown.
Reference: 1700 shows the object for JCY-1700/S.
"2" shows the object for FGB: CKA -137.
Reference:
When there is no numeric character (Cap-), the object for CKA-129 is shown.
Image Resolution
Refresh rate
The object for JCY-1800/1850 is shown.
Reference: 1700 shows the object for JCY-1700/S.
54