Option Unit (Nct-72/63) Connection Setup - JRC JCY-1800 Instruction Manual

4.5. Option unit (NCT-72/63) connection setup

In order to record a dry contact signal and an analog signal by the VDR/S-VDR, the Digital Signal Converter (DSC:
NCT-72/63) of an option unit is connected to the VDR/S-VDR. Set up the DSC in the following procedure.
4.5.1. Setting connection
CH 13, 14, 15, and 16 can connect the NCT-72/63.
Enable / Disable of the DSC connection can be set up to the above-mentioned channels.
1) Each channel
Enter a check mark into the check box of connected CH.
Enable:
Disable:
Check box
4.5.2. Starting detail setup
The detailed connection setting window of each channel is displayed.
1) Selecting CH
Click a radio button of setting sensor channel.
2) Click the [Detail] button on sensor section, a detail setting window is displayed.
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
[ ] (checked)
[ ] (unchecked)
4. Installation, Setup and Check
31
Select the object CH of set
up
Opening detail window
DOC No. 7ZPNA4014