4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.5.3. Selecting a recording data
Select the option unit (NCT-72/63) and recording data according to the following procedure.
The initial value for receiving the data of the option unit (NCT-72/63) is set up automatically on the detail setting
window.
4.5.3.1. In the case of new setting
DOC No. 7ZPNA4014
Select a "Option unit" from the pull-down menu.
Click the [Next] button.
Select connected "equipment" from the pull-down menu.
• In case of connecting dry contacts
Select the "DSC".
• In case of connecting dry contacts and analog signals
Select the "DSC+A/D"
(Analog Conversion Board (CEF-60) of an option is built
in the DSC.)
Click the [Next] button.
32