Sensor Connection Setup - JRC JCY-1800 Instruction Manual

4.3. Sensor connection setup

4.3.1. Setting connection
Enable / Disable of each sensor connection can be set up.
1) Each channel
Enter a check mark into the check box of connected CH.
Enable:
Disable:
Check box
Caution) Remove the mark from the check box when sensor connection setup is changed (enable to disable)
temporary. In not connecting, delete a setup data with reference to the 4.3.3.3th clause.
If a setup data remains even if it removes a mark from a check box, a setup data for recording the same
data may not be unable to be set to other CH.
4.3.2. Starting detail setup
The detailed setup window of each channel is displayed.
1) Selecting CH
Click a radio button of setting sensor channel.
2) Click the [Detail] button on Sensor section, a detail setup window is displayed.
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
[ ] (checked)
[ ] (unchecked)
4. Installation, Setup and Check
13
Opening detail window
Selecting the object CH of
set up
DOC No. 7ZPNA4014