4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
4.4.3.2.
Heading TAB screen
4.4.3.2.1.
Signal Type
Select Synchro or Step as signal type.
4.4.3.2.2.
Ratio
Select ratio in 1, 36, 90, 180 or 360 deg.
4.4.3.2.3.
Gray Code
Select Order Direction or Reverse Direction as rotation direction.
4.4.3.2.4.
Transmitting a setup data (Caution)
When the setup data of "Signal Type", "Ratio", or "Gray Code" are changed, transmit a setup data before
inputting an initial value of heading.
Click the [Set] button.
*
After data transmission, RCU is rebooted automatically and setting data become effective.
DOC No. 7ZPNA4014
28